ETI ETIMAT 10 Miniature Circuit Breaker 1P 6A C 10kA (2131712)

The ETI ETIMAT 10 miniature circuit breaker is used to protect electrical circuits from overload and short circuit in residential, commercial, and light industrial low-voltage networks. With one pole and a rated current of 6 A, it is suitable for protecting individual lighting circuits, auxiliary lines, and other consumers with low operating load. This makes it a practical option for distribution boards where each outgoing line requires separate protection. The C tripping characteristic indicates suitability for circuits with moderate inrush currents. This is important where connected equipment may briefly draw a higher current at startup, while still requiring reliable disconnection in fault conditions. The breaking capacity of 10 kA allows the device to interrupt high short-circuit currents, which is essential for maintaining circuit protection in installations with higher fault-level requirements. The breaker operates on AC systems with a rated voltage of 230/400 V and a frequency of 50/60 Hz, so it can be used in common single-phase and three-phase low-voltage installations according to the network design. The rated impulse withstand voltage Uimp is 6 kV, which confirms the device’s ability to withstand transient overvoltage effects in the electrical system. The terminal design supports conductor cross-sections from 1 mm² to 25 mm², providing compatibility with widely used wiring solutions in internal electrical installation work. This range is relevant when selecting conductors for distribution boards, lighting circuits, and other protected lines. The product complies with IEC/EN 60898-1 and IEC 60947-2 standards, which define requirements for low-voltage circuit breakers and their application in electrical installations. In practice, this means the device is intended for installation in distribution boards on a DIN rail as part of modular protection equipment. Thanks to its compact modular format, the breaker can be integrated with other protective and switching devices while maintaining clear circuit separation and straightforward maintenance. ETIMAT 10 is therefore suited for projects where a 1-pole, 6 A circuit breaker with C curve and 10 kA breaking capacity is required for controlled protection of individual electrical lines.