ETIMAT 10 modular circuit breaker 1P 4A characteristic C 10kA ETI
ETIMAT 10 by ETI is an automatic circuit breaker intended for protection of AC electrical circuits against overload and short circuit. It is used in d...
Категорія
Автоматичний вимикач
Номінальний струм (A)
4A
Характеристика спрацювання
C
Кількість полюсів
1
Вимикаюча здатність (кА)
10kA
Тип напруги
AC
Номінальна імпульсна напруга Uimp (kV)
6kV
Номінальна напруга AC (В)
230V/400V
Code: 2131710
ETIMAT 10 automatic circuit breaker is designed to protect electrical lines from overload and short circuit. It has 1 pole, a rated current of 4A, C tripping characteristic, and breaking capacity of 10kA.
299.52 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
ETIMAT 10 by ETI is an automatic circuit breaker intended for protection of AC electrical circuits against overload and short circuit. It is used in distribution boards of residential, commercial, and small industrial facilities where a controlled disconnection of a line is required under fault conditions. The one-pole design is suitable for protecting a single phase conductor in low-voltage installations.The device has a rated current of 4 A, which makes it appropriate for low-power circuits where it is important to limit load and prevent conductor overheating. The C tripping characteristic allows the breaker to tolerate short-term inrush currents without nuisance tripping, so it can be applied in circuits with electrical loads that have a noticeable start-up current. The breaking capacity of 10 kA provides interruption of short-circuit currents typical for many modern low-voltage networks.The breaker is designed for operation in AC networks with a rated voltage of 230/400 V and a frequency of 50/60 Hz. This makes it compatible with standard supply conditions used in household and commercial electrical systems. The nominal impulse withstand voltage Uimp of 6 kV indicates the ability to withstand short-duration overvoltages that may occur in the electrical installation. The specified terminal acceptance range for conductors from 1 mm² to 25 mm² helps when selecting the cable cross-section for a particular wiring scheme.The product complies with IEC/EN 60898-1 and IEC 60947-2, which define the requirements for performance, operation, and safety of automatic circuit breakers. Thanks to these technical characteristics, the device can be integrated into modular switchboards for protection of individual consumer groups, lighting lines, socket circuits, and other single-phase branches where precise circuit isolation is required.
Категорія
Автоматичний вимикач
Номінальний струм (A)
4A
Характеристика спрацювання
C
Кількість полюсів
1
Вимикаюча здатність (кА)
10kA
Тип напруги
AC
Номінальна імпульсна напруга Uimp (kV)
6kV
Номінальна напруга AC (В)
230V/400V
Номінальна частота (Hz)
50Hz/60Hz
Номінальний перетин
1mm²-25mm²
Стандарт
IEC/EN 60898-1,IEC 60947-2
Призначення
Автоматичний вимикач
0 reviews
No reviews for this product yet. Be the first!