2131708 Авт. вимикач ETIMAT 10 1p C 2А (10 kA)

The ETI ETIMAT 10 circuit breaker is designed to protect electrical lines against overload and short circuit in AC distribution systems. With a rated current of 2 A, it is suitable for circuits with low power demand where precise circuit protection is required. The device has one pole, so it is used for switching and protecting a single outgoing line in distribution boards of residential, commercial, and auxiliary installations. The C tripping characteristic indicates that the breaker is intended for circuits with moderate inrush currents. This makes it appropriate for lines where brief current peaks may occur during the start-up of connected equipment. The breaking capacity of 10 kA allows the device to interrupt fault currents of significant magnitude, contributing to the protection of the electrical installation in the event of a short circuit. The rated AC voltage is 230/400 V, and the operating frequency is 50/60 Hz, which means the breaker is compatible with common single-phase and multi-phase AC networks. An impulse withstand voltage Uimp of 6 kV reflects resistance to short-duration overvoltage events. The permissible conductor cross-section of 1–25 mm² provides a broad connection range and simplifies integration into different wiring schemes. The product complies with IEC/EN 60898-1 and IEC 60947-2, confirming its suitability as a modular protective device for standard low-voltage applications. ETIMAT 10 is used in distribution boards for protecting individual consumer groups, lighting circuits, auxiliary lines, and other electrical loads where a single-pole circuit breaker with C characteristic and 10 kA breaking capacity is required.