ETI ETIMAT 10 3-pole MCB 32A B 10kA

ETI ETIMAT 10 3-pole MCB 32A B 10kA
ETI ETIMAT 10 3-pole MCB 32A B 10kA
Characteristics

Категорія

Автоматичний вимикач

Номінальний струм (A)

32A

Характеристика спрацювання

B

Кількість полюсів

3

Вимикаюча здатність (кА)

10kA

Тип напруги

AC

Номінальна імпульсна напруга Uimp (kV)

6kV

Номінальна напруга AC (В)

400V

ETI

Code: 2125719

ETI ETIMAT 10 3-pole MCB 32A B 10kA

Modular circuit breaker from the ETIMAT 10 series for protection of electrical circuits against overload and short circuit. Rated for 3 poles, 32A current, B tripping characteristic, and 10kA breaking capacity.

per pcs.

765.27 ₴

On Order

Quick order
Delivery

Delivery across Ukraine within 5 days from the purchase date.

Payment

Pay for orders via Liqpay and plata by mono services.

Guarantee

100% certified products. Service and support.

About product

The ETIMAT 10 modular circuit breaker from ETI is designed to protect electrical circuits against overload and short circuit in distribution boards used in residential, commercial, and small industrial facilities. With three poles, it provides simultaneous switching of three-phase AC lines, which makes it suitable for feeder and group circuits where all phases must be disconnected together. The device is intended for operation in AC networks with a rated voltage of 400 V and a frequency of 50/60 Hz.This model is rated at 32 A and has a B tripping characteristic. Such a trip curve is used in circuits with relatively low inrush current, including lighting circuits, socket groups, and other loads with moderate starting currents. The B characteristic enables prompt response to overloads while maintaining appropriate protection for standard consumer and distribution circuits. The breaking capacity of 10 kA allows the breaker to interrupt high short-circuit currents, which is an important parameter for electrical systems with elevated fault-current levels.The breaker also has a rated impulse withstand voltage Uimp of 6 kV, indicating resistance to short-term overvoltage events in the network. This helps maintain proper operation under typical electrical stress conditions. Compliance with IEC/EN 60898-1 and IEC 60947-2 confirms that the device is designed for use in modular low-voltage switchboards and meets the relevant requirements for circuit protection equipment.For connection convenience, the breaker accepts conductors with a cross-section from 1 to 25 mm², which supports installation in different wiring schemes. This makes it practical for use in distribution panels where conductor sizes may vary depending on the protected circuit. Combining a 3-pole design, 32 A rated current, B characteristic, and 10 kA breaking capacity, this circuit breaker is a functional protective device for three-phase electrical lines in standardized modular installations.

Головна

Категорія

Автоматичний вимикач

Номінальний струм (A)

32A

Характеристика спрацювання

B

Кількість полюсів

3

Вимикаюча здатність (кА)

10kA

Тип напруги

AC

Номінальна імпульсна напруга Uimp (kV)

6kV

Номінальна напруга AC (В)

400V

Номінальна частота (Hz)

50Hz/60Hz

Номінальний перетин

1mm²-25mm²

Стандарт

IEC/EN 60898-1,IEC 60947-2

Призначення

Автоматичний вимикач

-

0 reviews

No reviews for this product yet. Be the first!

Recently Viewed