ETI ETIMAT 6 2-pole 32A B curve circuit breaker 6kA (2113519)

ETI ETIMAT 6 is a two-pole circuit breaker designed for protection of electrical circuits against overload and short circuit in single-phase and two-phase AC networks. It is used in distribution boards of residential, commercial, and other electrical installations where automatic disconnection of a line is required under fault conditions. The two-pole design disconnects two conductors simultaneously, which is important for proper circuit isolation and convenient maintenance. This model is rated at 32 A, so it is suitable for lines with a corresponding load. The B tripping characteristic means the device responds quickly to overloads and short-duration inrush currents, making it appropriate for circuits with mainly resistive loads. The breaking capacity of 6 kA defines the maximum short-circuit current the breaker can safely interrupt in typical low-voltage applications. These parameters make the device suitable for standard distribution and final circuits where coordinated protection is required. The breaker operates in AC systems with a rated voltage of 400 V and a frequency of 50/60 Hz. The rated impulse withstand voltage Uimp is 6 kV, which indicates resistance to transient overvoltages caused by switching operations or external influences. This helps maintain protection performance in distribution systems exposed to normal network disturbances. The allowed conductor cross-section is 1 to 25 mm², which supports practical wiring selection during panel assembly. The product complies with IEC/EN 60898-1 and IEC 60947-2, the relevant standards for low-voltage circuit breakers. With these characteristics, ETIMAT 6 is intended for building distribution circuits where electrical ratings, standard compliance, and clear protective functionality are essential.