Shutter switch Schneider Electric Asfora anthracite, flush mount, 10 A, IP20 (EPH1300171)
Вимикач для жалюзі Schneider Electric Asfora EPH1300171 кольору антрацит - це механізм з супортом та з 2 накладками. Вимикач для керування жалюзі. Спо...
Категорія
ETIMAT S4 3p C16
Номінальний струм (A)
16A
Характеристика спрацювання
C
Кількість полюсів
3
Вимикаюча здатність (кА)
4.5kA
Тип напруги
AC
Номінальна імпульсна напруга Uimp (kV)
4kV
Номінальна напруга AC (В)
240V/415V
Code: 1910330
ETIMAT S4 circuit breaker is designed to protect electrical lines against overload and short circuit. It has 3 poles, rated current 16A, C characteristic, and breaking capacity 4.5 kA.
382.89 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
ETIMAT S4 from ETI is an automatic circuit breaker intended for protection of electrical lines against overload and short circuit. It is used in distribution boards of residential, commercial, and small industrial installations where three-phase circuit protection is required in standard AC networks. The device is suitable for circuit sections that need both switching and protective functions within common low-voltage distribution systems.
This model has 3 poles and a rated current of 16 A. The C tripping characteristic makes it appropriate for lines with moderate inrush currents, such as circuits supplying equipment that can draw a short-term current increase at start-up. This allows the breaker to respond correctly to overload and fault conditions while tolerating normal transient loads during switching-on of connected devices.
The breaking capacity of 4.5 kA defines the maximum short-circuit current the device can interrupt under specified conditions. Such a parameter is important for typical electrical networks where basic line protection is required. The breaker operates in AC systems with a rated voltage of 240/415 V and a rated frequency of 50/60 Hz, which covers standard distribution conditions used in many installations. The rated impulse withstand voltage Uimp is 4 kV, indicating resistance to short-term overvoltage events that may occur in the network.
The product complies with EN 60898-1, IEC 60898-1, and IEC 60947-2 standards, confirming its conformity with the requirements for low-voltage circuit protection devices. The rated cross-section of 125 mm² refers to the conductor size that can be used within the technical design of the device. With its 3-pole configuration, 16 A nominal current, C characteristic, and 4.5 kA breaking capacity, this circuit breaker is a practical solution for protecting three-phase electrical lines in switchboards where standardized parameters and dependable protective switching are required.
Категорія
ETIMAT S4 3p C16
Номінальний струм (A)
16A
Характеристика спрацювання
C
Кількість полюсів
3
Вимикаюча здатність (кА)
4.5kA
Тип напруги
AC
Номінальна імпульсна напруга Uimp (kV)
4kV
Номінальна напруга AC (В)
240V/415V
Номінальна частота (Hz)
50Hz/60Hz
Номінальний перетин
125mm²
Стандарт
EN 60898-1,IEC 60898-1,IEC 60947-2
Призначення
Автоматичний вимикач
0 reviews
No reviews for this product yet. Be the first!