ETI ETIMAT P10 circuit breaker 3P+N 3A D 10kA (1901445)

The ETI ETIMAT P10 automatic circuit breaker is designed to protect electrical circuits against overload and short circuit in three-phase AC installations. The 3P+N configuration includes three phase poles and a neutral conductor, so the device disconnects all active conductors together. This makes it suitable for distribution boards where simultaneous switching of phase lines and neutral is required. With a rated current of 3 A, this model is intended for low-load circuits. The D tripping characteristic allows operation in circuits with higher inrush currents, which is important for equipment that creates short-term current surges at startup. A breaking capacity of 10 kA provides the ability to interrupt high short-circuit currents, supporting the protection of both the network and connected consumers. The breaker is rated for 415 V AC and operates at 50/60 Hz, so it can be used in standard alternating-current systems. The rated impulse withstand voltage Uimp of 6 kV indicates resistance to short-duration overvoltage events that may occur in electrical installations. These electrical parameters make the device suitable for use in residential, commercial, and technical distribution panels. The model complies with EN/IEC 60898, the standard for household and similar modular circuit breakers. The conductor connection range of 1–25 mm² provides flexibility when selecting cable or wire cross-section for different distribution board layouts. ETIMAT P10 series devices are used for branch circuit protection and for isolating individual load groups where compact modular installation and clear protection parameters are required.