ETI ETIMAT P10 circuit breaker 3P+N C 10A 10kA (1901428)

The ETIMAT P10 circuit breaker by ETI is designed to protect AC electrical circuits against overload and short circuit conditions. It is used in distribution boards in residential, commercial, and small industrial installations where reliable disconnection of outgoing lines during fault conditions is required. Thanks to its electrical characteristics, this device is suitable for circuit protection in systems with defined operating parameters and controlled load distribution. This model has a 3P+N pole configuration, meaning three phases plus neutral. The rated current is 10 A, which makes it appropriate for circuits with relatively low operating load. The C tripping characteristic indicates that the breaker is intended for lines with moderate inrush currents, so it can be applied where short-term current peaks occur during equipment startup. The breaking capacity of 10 kA provides the ability to interrupt high short-circuit currents, which is an important parameter for installations with elevated fault current levels. The breaker is rated for AC 415 V and operates at a frequency of 50/60 Hz, making it suitable for standard alternating-current networks. Its rated impulse withstand voltage Uimp is 6 kV, which reflects resistance to transient overvoltages in the electrical system. The permissible conductor cross-section for connection is 1–25 mm², allowing use with commonly applied cable and wire sizes in panel wiring. The device complies with EN/IEC 60898, confirming its intended use in electrical installations for household and similar applications. As a modular protective device, it is installed in a distribution board and used to separate and protect individual circuit groups. ETI’s ETIMAT P10 series combines clearly defined electrical ratings with compatibility for AC network protection tasks, making it a practical choice for organized circuit control and fault isolation.