1901416 Авт. вимикач ETIMAT P10 3p+N B 63A (10kA)
ETI ETIMAT P10 is an automatic circuit breaker designed to protect AC electrical circuits against overloads and short circuits. The 3P+N configuration...
Категорія
ETIMAT P10 3p+N B63
Номінальний струм (A)
63A
Характеристика спрацювання
B
Кількість полюсів
3+N
Вимикаюча здатність (кА)
10kA
Тип напруги
AC
Номінальна імпульсна напруга Uimp (kV)
6kV
Номінальна напруга AC (В)
415V
Code: 1901416
Автоматичний вимикач ETIMAT P10 призначений для захисту електричних кіл від перевантаження та короткого замикання. Має 3P+N, номінальний струм 63A, характеристику спрацювання B і вимикаючу здатність 10kA.
1,776.15 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
ETI ETIMAT P10 is an automatic circuit breaker designed to protect AC electrical circuits against overloads and short circuits. The 3P+N configuration makes it suitable for three-phase networks with a neutral conductor, where it is necessary to control three phase lines and the neutral simultaneously. Such a design is commonly used in distribution boards for residential, commercial, and small industrial installations, where reliable disconnection in fault conditions is required.
The rated current of 63 A allows the device to be applied in circuits with increased load. Trip characteristic B indicates that the breaker is intended for circuits with relatively low inrush currents and provides fast response under overload and short-circuit conditions. This makes it appropriate for many general-purpose power lines and distribution circuits. The breaking capacity of 10 kA defines the device’s ability to interrupt high short-circuit currents, which is an important parameter for protective equipment used in modern low-voltage networks.
The breaker is rated for AC operation at 415 V and a frequency of 50/60 Hz. Its rated impulse withstand voltage, Uimp, is 6 kV, which describes resistance to short-duration overvoltage pulses in the network. The terminal range for conductor connection is 1 to 25 mm², allowing use with cables of different cross-sections depending on the wiring scheme and load requirements. This flexibility is important during installation in standardized modular switchboards.
The device complies with EN/IEC 60898, the standard governing miniature circuit breakers for household and similar applications. This confirms that the breaker is intended for modular board installation and for use in circuits where standardized protection parameters are required. With its defined electrical ratings, 3P+N pole arrangement, and 10 kA breaking capacity, ETIMAT P10 is a practical choice for protecting three-phase lines and ensuring proper circuit interruption under abnormal operating conditions.
Категорія
ETIMAT P10 3p+N B63
Номінальний струм (A)
63A
Характеристика спрацювання
B
Кількість полюсів
3+N
Вимикаюча здатність (кА)
10kA
Тип напруги
AC
Номінальна імпульсна напруга Uimp (kV)
6kV
Номінальна напруга AC (В)
415V
Номінальна частота (Hz)
50Hz/60Hz
Номінальний перетин
1mm²-25mm²
Стандарт
EN/IEC 60898
Призначення
Автоматичний вимикач
0 reviews
No reviews for this product yet. Be the first!