1901415 Авт. вимикач ETIMAT P10 3p+N B 50A (10kA)

ETIMAT P10 by ETI is a circuit breaker designed to protect AC electrical circuits against overloads and short circuits. It is intended for installation in distribution boards used in residential, commercial, and industrial facilities where three-phase circuits with a neutral conductor need to be switched and protected. The 3P+N configuration allows the device to disconnect three phase conductors together with the neutral, which is important for power supply circuits, group feeders, and load distribution in 415 V networks. With a rated current of 50 A, this device is suitable for circuits with higher load requirements. The B tripping characteristic makes it appropriate for lines with low to moderate inrush currents, so it can be used for cable protection, lighting circuits, socket circuits, and mixed loads where fast disconnection is required when the current exceeds permissible values. The 10 kA breaking capacity enables interruption of fault short-circuit currents at a level suitable for most modern electrical installations. The breaker is rated for AC operation, with a nominal voltage of 415 V and a frequency range of 50/60 Hz. The rated impulse withstand voltage Uimp is 6 kV, which indicates resistance to transient overvoltage events in the network. Compliance with EN/IEC 60898 confirms that the device meets the requirements applicable to circuit breakers used in domestic and similar installations. The model is designed for modular panel installation and accepts conductors with a cross-section from 1 to 25 mm². This makes it compatible with a wide range of cable types used in electrical distribution systems. ETIMAT P10 combines the key parameters needed for reliable circuit protection in installations where correct interruption of fault conditions, conductor compatibility, and standard-compliant performance are required.