ETI SV 340 load breaker, 3-pole, 40 A
ETI SV 340 is a load breaker designed for switching electrical circuits under load in distribution switchboards and other low-voltage installations. U...
Категорія
ETIMAT P10 3p+N B20
Номінальний струм (A)
20A
Характеристика спрацювання
B
Кількість полюсів
3+N
Вимикаюча здатність (кА)
10kA
Тип напруги
AC
Номінальна імпульсна напруга Uimp (kV)
6kV
Номінальна напруга AC (В)
415V
Code: 1901411
The ETIMAT P10 circuit breaker protects electrical circuits against overloads and short circuits. It has 3 poles plus neutral, a rated current of 20A, B tripping characteristic, and a breaking capacity of 10kA.
1,276.95 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
The ETI ETIMAT P10 circuit breaker is designed to protect electrical circuits against overloads and short circuits in distribution boards for residential, commercial, and light industrial installations. With a 3P+N pole configuration, it is intended for switching and protecting three-phase lines with a neutral conductor, making it suitable for AC network applications where all phase conductors and the neutral need to be controlled together.
This model has a rated current of 20 A and a B tripping characteristic. Such settings are typically used for circuits with relatively low inrush currents, including lighting groups and individual socket circuits. The B curve provides fast disconnection when current rises above the normal operating level, helping to protect the connected wiring and equipment in standard final circuits.
The breaking capacity of 10 kA indicates the device’s ability to interrupt high short-circuit currents safely, which is important in installations with increased fault-level requirements. The breaker is rated for 415 V AC and operates at 50/60 Hz, covering common three-phase supply systems. Its rated impulse withstand voltage, Uimp, is 6 kV, reflecting resistance to short-duration voltage surges that may occur during switching events or external disturbances.
Compliance with EN/IEC 60898 confirms that the device meets the requirements for modular circuit protection equipment used in residential and similar environments. The allowed conductor cross-section is 1 to 25 mm², which supports integration into a wide range of electrical wiring schemes and simplifies connection during panel assembly.
Overall, the ETIMAT P10 3P+N 20A B 10 kA circuit breaker is a practical solution for protecting feeder and group circuits in modular switchboards, especially where three-phase distribution with neutral separation is required. Its technical parameters make it appropriate for installations that need defined protective characteristics, a high breaking capacity, and compatibility with standard AC distribution systems.
Категорія
ETIMAT P10 3p+N B20
Номінальний струм (A)
20A
Характеристика спрацювання
B
Кількість полюсів
3+N
Вимикаюча здатність (кА)
10kA
Тип напруги
AC
Номінальна імпульсна напруга Uimp (kV)
6kV
Номінальна напруга AC (В)
415V
Номінальна частота (Hz)
50Hz/60Hz
Номінальний перетин
1mm²-25mm²
Стандарт
EN/IEC 60898
Призначення
Автоматичний вимикач
0 reviews
No reviews for this product yet. Be the first!