1901345 Авт. вимикач ETIMAT P10 3p D 3A (10kA)

The ETIMAT P10 series circuit breaker by ETI is designed to protect electrical circuits against overload and short circuit currents. It is used in distribution boards of residential, commercial, and industrial facilities where automatic disconnection of a line is required in the event of an abnormal operating condition. The three-pole design allows simultaneous switching of three phases, making the device suitable for three-phase networks and equipment with corresponding connection requirements. This model is rated at 3 A, so it is intended for circuits with low current load where the permissible current must be limited to a defined value. The D tripping characteristic indicates suitability for circuits with higher inrush currents. This is especially relevant for electrical lines where connected equipment draws a short-term current surge during startup. With this characteristic, the breaker responds with consideration for such starting processes and does not trip unnecessarily fast. A breaking capacity of 10 kA means the device can interrupt the circuit under high short-circuit currents. This is an important selection criterion for protective devices in networks where significant fault currents may occur. The combination of 3 poles, 3 A rating, D characteristic, and 10 kA breaking capacity provides a functional solution for protecting three-phase circuits in panel equipment. The ETIMAT P10 circuit breaker is a modular device intended for installation in standard distribution boards. It is used as a local protection element for individual lines, disconnecting power in the event of overload or short circuit and helping maintain the operation of the electrical network and connected equipment.