1901341 Авт. вимикач ETIMAT P10 3p D 0,5A (10kA)

The ETIMAT P10 automatic circuit breaker from ETI is designed to protect electrical circuits against overloads and short circuits. Its three-pole design makes it suitable for three-phase AC networks where simultaneous switching and protection of three lines are required. With a rated current of 0.5 A, this device is intended for circuits with low operating load, while the D tripping characteristic makes it appropriate for lines with higher inrush currents, such as circuits feeding equipment with pronounced startup loads. The breaking capacity of 10 kA allows the breaker to interrupt fault currents in the event of a short circuit, which is an important parameter for installations with elevated protection requirements. The device is rated for AC operation at 415 V and a frequency of 50/60 Hz, so it can be integrated into standard low-voltage distribution systems. The impulse withstand voltage Uimp of 6 kV indicates resistance to short-duration overvoltages in the network and supports stable operation in typical electrical installation conditions. ETIMAT P10 complies with EN/IEC 60898, the standard that defines requirements for circuit breakers used in domestic and similar fixed installations. This compliance is relevant for distribution boards in residential, commercial, and technical facilities where equipment must meet common installation and protection criteria. Another practical feature is the conductor connection range from 1 mm² to 25 mm², which broadens installation options in distribution panels and simplifies selection of compatible wiring within the permitted limits. This makes the breaker suitable for various circuit configurations without exceeding the specified terminal capacity. Overall, this three-pole breaker combines low rated current, D curve operation, 10 kA breaking capacity, AC compatibility, and standard-compliant construction for use in three-phase circuits requiring controlled disconnection and fault protection.