1901333 Авт. вимикач ETIMAT P10 3p C 32A (10kA)

The ETIMAT P10 series circuit breaker from ETI is designed to protect electrical circuits against overloads and short circuits. It is used in distribution boards in residential, commercial, and small industrial installations where three-phase lines or grouped loads need to be switched and protected according to the expected load level. This model has 3 poles and a rated current of 32 A. The C tripping characteristic makes it suitable for circuits with moderate inrush currents, including equipment that may briefly draw a higher current during startup. The breaking capacity of 10 kA allows the device to interrupt the circuit under significant short-circuit currents, which is important in networks with increased protection requirements. The unit is intended for AC circuits with a rated voltage of 415 V and a frequency of 50/60 Hz. The rated impulse withstand voltage Uimp is 6 kV, which indicates resistance to transient overvoltages. The permitted conductor cross-section range is 1 to 25 mm², which provides flexibility when connecting conductors within typical installation solutions. The product complies with EN/IEC 60898, a standard that defines requirements for circuit breakers used in household and similar electrical installations. This makes the device suitable for installation in modular distribution boards as a protective element for feeder and branch circuits. ETIMAT P10 combines circuit protection functions with parameters appropriate for three-phase systems and AC networks where disconnection under fault conditions is required.