1901326 Авт. вимикач ETIMAT P10 3p C 4A (10kA)

The ETIMAT P10 series circuit breaker from ETI is designed to protect AC electrical circuits against overloads and short circuits. It is used in distribution boards of residential, commercial, and industrial facilities where three-phase lines or consumer groups with relatively low load need reliable disconnection and protection. With three poles, the device provides simultaneous switching and protective interruption of all phase conductors in the circuit. This model is rated for a nominal current of 4 A and uses a C tripping characteristic. Such a characteristic makes the breaker suitable for circuits with moderate inrush currents, including dedicated supply lines for equipment or networks with inductive loads. The 10 kA breaking capacity allows the device to interrupt the circuit under high short-circuit currents, which is an important parameter for installations exposed to elevated fault current levels. The breaker operates in AC systems with a rated voltage of 415 V and a frequency of 50/60 Hz. Its rated impulse withstand voltage, Uimp, is 6 kV, confirming the ability to withstand transient overvoltages in the electrical network. Compliance with EN/IEC 60898 indicates that the device meets the requirements for circuit breakers used in the protection of domestic and similar electrical installations. The connection range for conductors is 1 mm² to 25 mm², which provides compatibility with widely used wiring options in switchboard assemblies. The modular design supports installation in distribution equipment alongside other modular devices. ETIMAT P10 combines three-pole protection, a 4 A nominal rating, C curve tripping, and a 10 kA breaking capacity for use in circuits where controlled disconnection and protection of the line are required.