1901325 Авт. вимикач ETIMAT P10 3p C 3A (10kA)

The ETIMAT P10 series automatic circuit breaker from ETI is designed to protect electrical circuits against overload and short circuit conditions. It is suitable for installation in distribution boards of residential, commercial, and industrial facilities where three-phase lines or grouped loads need reliable disconnection according to the network parameters. With three poles, the device provides simultaneous switching of all phase conductors, which is important for the correct operation of three-phase circuits and for coordinated protection of connected equipment. This model is rated at 3 A, making it appropriate for circuits with low operating current. The C tripping characteristic means the breaker tolerates short-term inrush currents without nuisance tripping, so it can be used in circuits supplying equipment with moderate starting currents. The breaking capacity of 10 kA indicates the ability to interrupt high short-circuit currents, which is essential in installations with increased protection requirements. The breaker is intended for AC networks with a rated voltage of 415 V and a frequency of 50/60 Hz. These electrical parameters define its use in standard low-voltage power systems. The rated impulse withstand voltage Uimp is 6 kV, showing resistance to short-duration voltage surges in the network. Such characteristics support stable operation of the protective device in systems where both normal switching and fault interruption must be handled correctly. A practical advantage of the device is its conductor connection range of 1–25 mm², which facilitates integration into panel wiring schemes with different conductor cross-sections. The product complies with EN/IEC 60898, the standard for modular circuit breakers used in household and similar installations. This makes the ETIMAT P10 3P 3 A C 10 kA a suitable solution for protecting branch circuits within distribution systems where defined tripping behavior, rated current selection, and sufficient breaking capacity are required.