ETI ETIMAT P10 Automatic circuit breaker 3P 1A C 10kA (1901322)

ETIMAT P10 from ETI is an automatic circuit breaker intended for protecting electrical circuits against overload and short circuit. It is used in distribution boards of residential, commercial, and small industrial installations where reliable disconnection of three-phase lines or other consumer groups is required according to the network parameters. This model has 3 poles and a rated current of 1 A, which makes it suitable for low-current circuits. The C tripping characteristic allows the device to operate in circuits with moderate inrush currents, where brief start-up loads may occur during equipment switching on. With a breaking capacity of 10 kA, the breaker is designed to interrupt high fault currents that may appear in case of short circuit, helping to maintain circuit protection within the specified operating conditions. The device is intended for AC networks with a rated voltage of 415 V and a frequency of 50/60 Hz. Such electrical parameters define its use in standard power distribution systems. The rated impulse withstand voltage Uimp is 6 kV, which is important for operation in networks exposed to transient overvoltages. Another practical feature is the conductor connection range based on a rated cross-section of 1–25 mm², allowing compatibility with a wide range of cable and wire sizes within the breaker’s technical limits. The product complies with EN/IEC 60898, the standard that sets requirements for automatic circuit breakers used in household and similar electrical installations. This makes the breaker appropriate for engineering and assembly of switchboards where conformity to normative requirements and correct coordination of electrical characteristics are essential. ETIMAT P10 3P 1 A C 10 kA is a functional solution for protecting low-power three-phase circuits in systems that require defined operating parameters, standard compliance, and installation in modular distribution equipment.