ETI ETIMAT P10 2-pole 2A D 10kA circuit breaker (1901244)

The ETI ETIMAT P10 circuit breaker is designed for protection of electrical circuits against overloads and short circuits in distribution boards and other low-voltage installations. With a rated current of 2 A, it is intended for lines with low load, where accurate circuit protection is required without unnecessary tripping during normal operation. The device is suitable for AC systems with a rated voltage of 415 V and a frequency of 50/60 Hz, which makes it applicable in residential, administrative, and small industrial networks. This model has 2 poles, allowing simultaneous switching of two conductors according to the connection scheme. The D tripping characteristic indicates a higher tolerance to short-term inrush currents, so the breaker can be used in circuits where equipment with significant starting currents is connected. The breaking capacity of 10 kA provides disconnection of high fault currents, which is important for modern power distribution systems with increased short-circuit levels. The rated impulse withstand voltage Uimp is 6 kV, confirming resistance to short-duration overvoltage events in the network. Compliance with EN/IEC 60898 means the device meets the requirements for circuit breakers used in household and similar applications. The breaker supports conductors with a cross-section from 1 mm² to 25 mm², which simplifies integration into electrical switchboards and allows convenient connection of different wiring sizes within the specified range. ETIMAT P10 2P D2 is a modular protective device intended for installation in electrical panels on a DIN rail as part of circuit distribution and protection systems. Its parameters make it suitable for dedicated low-current lines, where a 2 A rating, D curve, and 10 kA breaking capacity are all relevant for reliable operation under load and during fault conditions.