Automatic circuit breaker ETI ETIMAT P10 2P 63A C 10kA (1901236)

ETI ETIMAT P10 is a circuit breaker designed for protection of electrical circuits against overloads and short circuits in AC networks. Its two-pole design allows simultaneous switching of two conductors, which is useful in distribution lines where a single device is required to disconnect the circuit. With a rated current of 63 A, this model is suitable for circuits with increased load, while the C tripping characteristic provides proper operation in lines with moderate inrush currents, such as supplies to equipment that draws a higher current at start-up. The breaking capacity of 10 kA makes this device suitable for installations where high short-circuit currents may occur. This parameter is important when selecting protection devices for distribution boards, as it helps ensure correct operation under fault conditions. The breaker is rated for AC networks with a nominal voltage of 415 V and operates at 50/60 Hz, which corresponds to common electrical supply parameters. Its rated impulse withstand voltage, Uimp, is 6 kV, indicating resistance to transient overvoltages in the network. The model complies with EN/IEC 60898, a standard that defines requirements for circuit breakers used in household and similar installations. This makes the device appropriate for use in residential and light commercial electrical systems. The conductor connection range from 1 mm² to 25 mm² provides flexibility during wiring and allows integration into different internal electrical schemes. ETIMAT P10 is typically installed in distribution boards for protection of individual lines, including lighting circuits, socket groups, and other loads that require automatic disconnection during abnormal operating conditions. The combination of two poles, 63 A rating, C curve, and 10 kA breaking capacity makes it a practical protective device for circuits where reliable interruption and conformity to standard modular equipment requirements are necessary.