ETI ETIMAT P10 Circuit Breaker 2P 32A C 10kA (1901233)

ETI ETIMAT P10 is a two-pole automatic circuit breaker designed for protecting AC electrical circuits against overloads and short circuits. It is used in distribution boards for residential, commercial, and small industrial installations where simultaneous disconnection of two conductors is required. With a rated current of 32 A, this device is suitable for branch circuits and power supply lines operating within this load range. The C tripping characteristic indicates that the breaker is intended for circuits with elevated inrush currents. This makes it appropriate for loads such as motors, transformers, and other equipment that may draw a short starting current higher than the steady operating current. The 10 kA breaking capacity provides the ability to interrupt fault currents in the event of a short circuit, which is an important parameter for electrical systems with higher protection requirements. The breaker is rated for AC systems with a nominal voltage of 415 V and a frequency of 50/60 Hz. Its impulse withstand voltage, Uimp, is 6 kV, which reflects resistance to short-duration overvoltage events. The permitted conductor cross-section of 1–25 mm² gives flexibility in installation and allows the device to be integrated into different wiring schemes with appropriately selected cable conductors. This model complies with EN/IEC 60898, the standard for circuit breakers intended for household and similar applications. The 2P design enables both poles to be switched off at the same time, which is useful in circuits where full isolation of the line is needed. ETIMAT P10 combines the specified electrical ratings and installation parameters into a compact modular device for use in protective distribution assemblies.