ETI ETIMAT P10 circuit breaker 2P 20A C 10kA (1901231)

The ETIMAT P10 series from ETI is a circuit breaker intended for protection of electrical circuits against overload and short circuit. It is used in distribution boards of residential, commercial, and small industrial facilities where controlled disconnection of the line is required in emergency operating modes. The two-pole design makes it suitable for simultaneous switching and protective disconnection of two conductors in AC circuits. With a rated current of 20 A, this device is designed for lines with the corresponding operating load. The C tripping characteristic indicates that the breaker can withstand short-term inrush currents that occur when equipment with moderate starting loads is switched on. This makes it suitable for group circuits supplying household or auxiliary electrical loads with brief current peaks at start-up. The breaking capacity of 10 kA allows the circuit breaker to interrupt the circuit under significant short-circuit currents, which is important in networks with elevated fault current levels. The device is rated for AC voltage up to 415 V and operates at a frequency of 50/60 Hz. The impulse withstand voltage Uimp is 6 kV, confirming resistance to short-duration voltage surges within the specified parameters. Installation is performed in a standard modular distribution board on a DIN rail. The permissible conductor cross-section is 1 to 25 mm², which provides flexibility when connecting different types of wiring within the stated range. The product complies with EN/IEC 60898, the standard defining requirements for circuit breakers intended for household and similar applications. ETIMAT P10 2P 20A C 10kA is a practical solution for organizing basic electrical protection in distribution systems with clearly defined electrical characteristics and compatibility with modular panel equipment.