ETI ETIMAT P10 circuit breaker 2P 16A C 10kA (1901230)

ETIMAT P10 from ETI is a two-pole automatic circuit breaker intended for protecting AC electrical circuits against overloads and short circuits. It is used in distribution boards for residential, commercial, and light industrial installations where simultaneous disconnection of two conductors is required. This makes it suitable for group lines and individual loads in power distribution systems operating at 415 V AC. The device is rated at 16 A, which supports circuits with moderate load, such as lighting, socket circuits, and other standard consumers. The C tripping characteristic means the breaker can tolerate short-term inrush currents without unnecessary tripping, which is important in circuits with moderate starting loads. With a breaking capacity of 10 kA, the breaker is designed to disconnect high fault currents and is suitable for networks where short-circuit currents may be elevated. The breaker operates in AC circuits with a rated voltage of 415 V and a frequency of 50/60 Hz. Its rated impulse withstand voltage, Uimp, is 6 kV, indicating resistance to transient overvoltages that may occur in electrical networks. The permitted conductor cross-section ranges from 1 to 25 mm², which provides flexibility during installation and makes the device adaptable to different wiring schemes and distribution layouts. ETIMAT P10 complies with EN/IEC 60898, the standard for modular protection devices used in household and similar applications. This confirms its intended use in standard distribution equipment and modular panel assemblies. Thanks to its two-pole design, 16 A rating, C curve, 10 kA breaking capacity, and suitability for DIN rail installation, this circuit breaker is a practical solution for basic line protection where coordinated switching of two conductors and compliance with standard electrical protection requirements are needed.