ETI ETIMAT P10 Circuit Breaker 2P 10A C 10kA (1901228)

The ETIMAT P10 automatic circuit breaker from ETI is designed for protecting AC electrical circuits against overloads and short circuits. With two poles, it is suitable for applications where simultaneous disconnection of two conductors is required, making it relevant for distribution boards in residential, commercial, and light industrial installations. The device is rated at 10 A and features a C tripping characteristic. This makes it appropriate for circuits with moderate inrush currents, such as lighting lines, socket groups, and individual loads that may create short-term current peaks during start-up. The breaking capacity of 10 kA allows the breaker to interrupt high fault currents, helping protect wiring and connected equipment in the event of a short circuit. The breaker is intended for AC networks with a rated operating voltage of 415 V and a frequency of 50/60 Hz. The rated impulse withstand voltage Uimp is 6 kV, which indicates resistance to short-duration voltage surges in the network. The terminal design accepts conductors with a cross-section from 1 to 25 mm², providing flexibility for use with different cable sizes within the specified limits. ETIMAT P10 complies with EN/IEC 60898, the standard applicable to circuit breakers for household and similar installations. As a modular device, it is mounted in a distribution board on a DIN rail and integrates with standard electrical installation systems. The combination of 2-pole construction, 10 A rating, C curve, and 10 kA breaking capacity makes this breaker a practical choice for creating protected AC circuits where reliable switching and fault protection are required.