ETI ETIMAT P10 Circuit Breaker 2P 6A C 10kA (1901227)

The ETI ETIMAT P10 circuit breaker is designed to protect electrical circuits from overloads and short circuits in distribution boards used in residential, commercial, and light industrial installations. It is intended for AC networks where reliable disconnection of a two-pole line is required under the specified electrical conditions. This model has 2 poles and a rated current of 6 A, which makes it suitable for circuits with relatively low load. The C tripping characteristic is used for lines with moderate inrush currents, for example when connected equipment may draw a short-term current increase during startup. This makes the device appropriate for applications where standard protection must be coordinated with the operating behavior of the connected load. The breaking capacity is 10 kA, allowing the breaker to interrupt high fault currents in networks with increased short-circuit levels. The rated AC voltage is 415 V, and the rated frequency is 50/60 Hz, so the device can be used in systems operating at either 50 Hz or 60 Hz. The nominal impulse voltage Uimp is 6 kV, which indicates resistance to short-duration overvoltage events in the installation. For conductor connection, the breaker supports a nominal cross-section range from 1 mm² to 25 mm². This gives flexibility when integrating the device into electrical assemblies with conductors within the declared range. The product complies with EN/IEC 60898, the standard for circuit breakers intended for household and similar installations. ETIMAT P10 2p C6 is used as a protective switching device for branch circuits in switchboards, where simultaneous switching of both poles is required. Its combination of 6 A rated current, C characteristic, 10 kA breaking capacity, and AC operation parameters makes it suitable for organized circuit protection in installations that must meet defined electrical and normative requirements.