1901225 Авт. вимикач ETIMAT P10 2p C 3A (10kA)

This circuit breaker from the ETIMAT P10 series by ETI is designed to protect electrical circuits against overload and short circuit. It is used in distribution boards of residential, commercial, and other electrical installations where reliable disconnection of a two-wire line or a two-pole circuit is required. With two poles, the device allows simultaneous switching of both lines, which is important for safe operation and maintenance of the electrical network. The model is rated for a nominal current of 3 A and uses a C tripping characteristic. This makes it suitable for circuits with moderate inrush currents, where brief current peaks may occur during start-up of connected equipment. The 10 kA breaking capacity enables the device to interrupt short-circuit current under appropriate network conditions and is an important parameter for installations with increased requirements for switching performance. The breaker is intended for AC systems with a rated voltage of 415 V and a frequency of 50/60 Hz. Its rated impulse withstand voltage, Uimp, is 6 kV, which characterizes resistance to short-term overvoltage events. The connection range of 1 mm² to 25 mm² supports integration into typical electrical wiring schemes and simplifies selection of suitable conductors during installation. The device complies with EN/IEC 60898, the standard defining requirements for circuit breakers used in household and similar installations. This makes the model appropriate for standard distribution systems where precise electrical parameters, compatibility with modular equipment, and defined operating characteristics are essential. The ETIMAT P10 2p C3 designation clearly identifies the series, number of poles, and tripping class, helping with correct selection during panel assembly and circuit protection planning.