1901224 Авт. вимикач ETIMAT P10 2p C 2A (10kA)

The ETI ETIMAT P10 circuit breaker is designed to protect electrical circuits against overloads and short circuits. It is used in distribution boards of residential, commercial, and small industrial installations where independent switching of a two-pole line is required. With a rated current of 2 A, this device is suitable for low-load circuits, while the C tripping characteristic allows stable operation in circuits with moderate inrush currents. The unit has 2 poles, which ensures simultaneous disconnection of two conductors. This configuration is practical for AC networks where coordinated switching of the line is needed. The breaking capacity of 10 kA indicates the breaker’s ability to interrupt short-circuit current at the specified level, which is an important parameter for installations with increased protection requirements. The device is rated for AC operation at 415 V and 50/60 Hz, making it compatible with standard alternating-current distribution systems. Another important technical parameter is the impulse withstand voltage Uimp of 6 kV. This value characterizes resistance to short-duration overvoltage events and contributes to the correct operation of the breaker in networks subject to transient disturbances. The permissible conductor cross-section is 1–25 mm², which provides flexibility when connecting different types of cable and wire within the stated terminal range. The product complies with EN/IEC 60898, the standard for circuit breakers used in household and similar installations. This confirms that the device is intended for modular panel installation and for use as part of standard low-voltage distribution equipment. ETIMAT P10 combines a compact two-pole design, 2 A rated current, C characteristic, and 10 kA breaking capacity, making it suitable for protecting lines that require precise operational control and reliable interruption of fault currents.