1901214 Авт. вимикач ETIMAT P10 2p B 40A (10kA)

The ETIMAT P10 series automatic circuit breaker from ETI is designed to protect electrical circuits against overload and short circuit. It is used in distribution boards of residential, commercial, and small industrial installations where a two-pole line must be disconnected under fault conditions. With a rated current of 40 A, this device is suitable for circuits with increased load, while the B tripping characteristic provides fast response in circuits with low inrush currents, such as lighting and general-purpose power groups. The breaker has 2 poles, which allows simultaneous protection and disconnection of two conductors in single-phase or other suitable connection schemes. Its breaking capacity of 10 kA indicates the ability to safely interrupt the circuit under high short-circuit currents, which is an important parameter for networks with elevated fault levels. The rated AC voltage is 415 V, and the device is intended for AC systems operating at 50/60 Hz. An additional technical advantage is the rated impulse withstand voltage Uimp of 6 kV, which reflects resistance to short-duration overvoltage events in the network. The rated conductor cross-section is 1 to 25 mm², ensuring compatibility with commonly used cable and wiring solutions in electrical installation work. The product complies with EN/IEC 60898, the standard regulating requirements for miniature circuit breakers used in domestic and similar installations. ETIMAT P10 2P 40A B 10kA is a practical solution for circuit protection where accurate disconnection parameters, modular installation compatibility, and compliance with an international standard are required.