Circuit breaker ETI ETIMAT P10 2P 32A B 10kA (1901213)

The ETI ETIMAT P10 circuit breaker is intended for protection of electrical circuits against overload and short circuit in distribution boards of residential, commercial, and small industrial installations. It is used where controlled switching and reliable line protection are required for AC networks, including single- and two-pole circuits. This model has 2 poles and a rated current of 32 A, which makes it suitable for protecting feeder and final circuits with moderate load. The B tripping characteristic is designed for circuits with low inrush currents, such as lighting circuits and socket outlets. The breaking capacity of 10 kA allows the device to disconnect fault currents under severe short-circuit conditions, which is an important parameter for systems with higher fault levels. The breaker operates in AC systems with a rated voltage of 415 V and a rated frequency of 50/60 Hz. It also has a rated impulse withstand voltage Uimp of 6 kV, indicating resistance to short-duration voltage surges. The permitted conductor cross-section range is 1–25 mm², which provides compatibility with commonly used installation conductors in switchgear assemblies. Compliance with EN/IEC 60898 confirms that the device is designed in accordance with the requirements for miniature circuit breakers used in household and similar installations. ETIMAT P10 is intended for installation in modular distribution boards on DIN rail and serves as a protective element for separate consumer groups. The combination of two poles, 32 A rating, B curve, and 10 kA breaking capacity makes it suitable for organizing circuit protection in electrical distribution systems where compact modular equipment and clearly defined protection parameters are required.