ETI ETIMAT P10 2P 10A B 10kA Circuit Breaker (1901208)

The ETI ETIMAT P10 circuit breaker is intended for protection of electrical circuits against overload and short-circuit currents in AC installations. It is used in distribution boards of residential, commercial, and similar electrical systems where dependable disconnection of the line is required. With two poles, the device can disconnect two conductors simultaneously, which is suitable for circuits that require switching off both supply lines. This model has a rated current of 10 A, making it appropriate for circuits with relatively low operating load. The B tripping characteristic means the breaker is designed for circuits with low inrush currents, such as lighting circuits and other consumers where fast response to overload and short circuit is needed. The breaking capacity of 10 kA allows the device to interrupt fault currents in networks with a higher prospective short-circuit level. The breaker is rated for AC 415 V and operates at 50/60 Hz, so it can be used in AC networks with these electrical parameters. The rated impulse withstand voltage Uimp of 6 kV indicates resistance to transient overvoltage events that may occur in the power system. The conductor terminal range of 1–25 mm² allows connection of commonly used wire cross-sections in different installation schemes. Compliance with EN/IEC 60898 confirms that the device is intended for household and similar installations. Its modular form factor makes it suitable for mounting on a DIN rail in a distribution cabinet alongside other modular equipment. ETIMAT P10 combines a 10 A rating, two-pole disconnection, B characteristic, and 10 kA breaking capacity, making it a practical solution for circuit protection in compact switchboard assemblies.