1901205 Авт. вимикач ETIMAT P10 2p B 3A (10kA)

This ETI ETIMAT P10 circuit breaker is designed to protect electrical circuits against overloads and short circuits in distribution boards used in residential, commercial, and industrial installations. It is intended for switching and protecting two-pole AC lines where reliable disconnection of both conductors is required. With a rated current of 3 A, the device is suitable for low-load circuits, including individual lighting or control lines, provided the electrical parameters match the project requirements. The breaker has 2 poles, allowing simultaneous switching of two conductors. The B tripping characteristic indicates fast response in circuits with low inrush currents, which makes this device appropriate for lines with relatively stable load profiles. Its breaking capacity of 10 kA is an important parameter for systems where higher fault-current interruption capability is required, as it defines the maximum short-circuit current the breaker can safely disconnect within its rated class. The device operates on AC networks with a rated voltage of 415 V and a frequency of 50/60 Hz. The rated impulse withstand voltage Uimp is 6 kV, which reflects the breaker’s resistance to short-term voltage surges. The permitted conductor cross-section range is 1 to 25 mm², so the breaker can be connected to conductors within this range in accordance with the installation requirements and terminal design. ETIMAT P10 complies with EN/IEC 60898, the standard governing circuit breakers for household and similar installations. This makes it suitable for use in modular switchboards where compact two-pole protection is needed. The combination of 3 A rated current, B characteristic, 10 kA breaking capacity, and AC operation provides a clear set of technical parameters for selecting the breaker in projects that require protection of low-power circuits and coordinated switching of two conductors.