1901204 Авт. вимикач ETIMAT P10 2p B 2A (10kA)

The ETIMAT P10 series circuit breaker from ETI is designed to protect electrical circuits against overload and short circuit. It is used in distribution boards of residential, public, and commercial facilities where disconnection of a two-pole line and control of load in AC networks are required. Such a device is suitable for branch circuits that must be isolated with two poles for added switching flexibility in the installation. This model has 2 poles and a rated current of 2 A, which makes it appropriate for circuits with low current consumption. The B tripping characteristic means the breaker is intended for circuits with low inrush currents and provides response to overload and short-circuit conditions in typical final circuits. With a breaking capacity of 10 kA, the device is able to interrupt fault currents in installations with corresponding short-circuit levels, which is an important parameter for protective coordination in the panel. The breaker is designed for AC voltage and has a rated operating voltage of 415 V AC, allowing use in single-phase and three-phase systems depending on the wiring scheme. The rated impulse withstand voltage Uimp of 6 kV indicates resistance to short-duration surge events in the network. A frequency range of 50/60 Hz ensures compatibility with widely used AC power systems. The permissible conductor cross-section is 1 to 25 mm², which provides flexibility during connection of conductors within the specified installation requirements. The product complies with EN/IEC 60898, the standard governing miniature circuit breakers for household and similar fixed installations. In practice, this makes the ETIMAT P10 a suitable solution for protecting lighting circuits, control lines, and other low-power loads in switchboards where a compact two-pole protective device is needed.