1901053 Авт. вимикач ETIMAT P10 1p D 32A (10kA)

The ETI ETIMAT P10 circuit breaker is designed to protect AC electrical circuits against overload and short circuit conditions. It is intended for installation in distribution boards of residential, administrative, and small commercial facilities where automatic disconnection of a line is required in the event of a fault. The single-pole design allows protection of one conductor in single-phase circuits. This model is rated for a nominal current of 32 A and features a D tripping characteristic. Such a curve is suitable for circuits with higher inrush currents, for example when switching on equipment with electric motors or other inductive loads. The breaking capacity of 10 kA enables the device to interrupt high short-circuit currents, making it appropriate for networks with a greater potential fault current level. The rated AC voltage is 240 V, and the rated frequency is 50/60 Hz. In addition, the breaker has a rated impulse withstand voltage Uimp of 6 kV, which indicates resistance to short-term overvoltage conditions. These electrical parameters make the device suitable for use in standard low-voltage installations where stable protection and reliable circuit interruption are required. The product complies with EN/IEC 60898, the standard governing miniature circuit breakers for household and similar applications. The permissible conductor cross-section is 1–25 mm², which provides compatibility with a wide range of commonly used cables and wires of the corresponding size. This simplifies integration into existing electrical panels and distribution assemblies. ETIMAT P10 1P 32A D 10kA is a modular protective device intended for use in circuits where both overload protection and withstand capability against short-circuit currents are important. It can be applied for lighting circuits, socket groups, and equipment with start-up currents, where the D characteristic helps avoid nuisance tripping during normal switching transients.