1901047 Авт. вимикач ETIMAT P10 1p D 6A (10kA)

The ETIMAT P10 circuit breaker from ETI is designed to protect electrical circuits against overloads and short-circuit currents. It is used in distribution boards in residential, commercial, and small industrial installations where a separate line must be disconnected according to defined load parameters. This model has one pole and a rated current of 6 A, which makes it suitable for low-power consumers and individual branch circuits. The D tripping characteristic means the device can withstand short-term inrush currents higher than those tolerated by more sensitive characteristic curves, so it can be applied in circuits with equipment that has a pronounced starting current. The breaking capacity of 10 kA allows the breaker to interrupt the circuit under significant fault currents, which is important for networks with increased protection requirements. The device is intended for AC circuits with a rated operating voltage of 240 V and a frequency of 50/60 Hz. The rated impulse withstand voltage Uimp is 6 kV, indicating the ability to withstand short-duration surge voltages that may occur in the power network. The permissible conductor cross-section range of 1–25 mm² provides flexibility in installation and makes it possible to connect conductors of different sizes, depending on the wiring design. The product complies with EN/IEC 60898, the standard governing circuit breakers for the protection of household and similar electrical installations. This makes the device suitable for modular panel mounting and for organizing protection of individual lines where a combination of compact dimensions, a specified current rating, and high breaking capacity is required.