1901031 Авт. вимикач ETIMAT P10 1p C 20A (10kA)

The ETI ETIMAT P10 series automatic circuit breaker is designed to protect electrical lines against overloads and short circuits in AC networks. It is used in distribution boards for residential, commercial, and industrial installations where a single phase conductor needs to be protected. Thanks to its single-pole design, the device is suitable for individual branch circuits and for selective protection of separate consumer groups. This model is rated for a current of 20 A and has a C tripping characteristic. Such a characteristic is appropriate for circuits with moderate inrush currents, for example when equipment with short-term starting peaks is connected. The breaking capacity of 10 kA allows the breaker to disconnect the circuit under high short-circuit currents, which is especially important in networks with a higher fault current level. The breaker is intended for AC voltage, with a rated operating voltage of 240 V and a frequency of 50/60 Hz. The rated impulse withstand voltage Uimp is 6 kV, indicating resistance to temporary overvoltage events in the power supply system. The permissible conductor cross-section for connection is 1 to 25 mm², which gives flexibility when integrating the device into various internal wiring schemes. Compliance with EN/IEC 60898 confirms that the product meets the requirements for miniature circuit breakers used in household and similar applications. The ETIMAT P10 1P C20 is a practical choice for protecting lighting circuits, socket outlets, and other single-phase loads in panel installations where stable line protection and compatibility with standard modular equipment are required.