ETI ETIMAT P10 miniature circuit breaker 1P 16A C 10kA (1901030)

ETI ETIMAT P10 is a miniature circuit breaker designed for the protection of electrical circuits against overload and short circuit. It is intended for installation in distribution boards of residential, commercial, and small industrial facilities, where a single outgoing line must be reliably isolated and protected. With one pole, this device is suitable for single-phase AC systems and is commonly used in standard modular switchboards. The breaker is rated at 16 A and has a C tripping characteristic. This characteristic is appropriate for circuits with moderate inrush currents, such as lighting groups, socket circuits, and individual loads that may briefly draw higher current at start-up. The breaking capacity of 10 kA allows the device to disconnect the circuit under high short-circuit currents, which is an important parameter for installations with elevated fault current levels. The unit operates on AC voltage and is rated for 240 V AC with a frequency of 50/60 Hz. Its nominal impulse withstand voltage, Uimp, is 6 kV, indicating the ability to withstand short-term impulse overvoltages that can occur in the network. The permissible conductor cross-section is 1–25 mm², which provides flexibility for connection in various distribution board configurations and supports installation with a wide range of conductors. This model complies with EN/IEC 60898, the standard for miniature circuit breakers used in household and similar installations. The ETIMAT P10 series combines the specified pole count, rated current, C curve, and 10 kA breaking capacity into a compact modular device for line protection in electrical distribution systems. It is suitable for use in circuits where protection, switching, and clear separation of one line are required within a conventional low-voltage panel setup.