ETI ETIMAT P10 miniature circuit breaker 1P 3A C 10kA (1901025)

ETIMAT P10 from ETI is a miniature circuit breaker designed to protect electrical circuits against overloads and short circuits. It is used in distribution boards of residential, commercial, and small industrial installations where individual protection of a single line is required. With a 1-pole design, the device is intended for switching the phase conductor in single-phase circuits. The breaker is rated at 3 A, which makes it suitable for low-power loads such as auxiliary circuits or control lines. The C tripping characteristic allows the device to tolerate short-duration inrush currents without unnecessary disconnection, while still responding promptly to overload and short-circuit conditions. This characteristic is commonly used where connected loads may create brief current peaks during start-up. A breaking capacity of 10 kA provides the ability to interrupt high short-circuit currents, which is important for installations with a higher expected fault current level. The device operates on AC networks with a rated voltage of 240 V and a frequency of 50/60 Hz. It also has a rated impulse withstand voltage Uimp of 6 kV, which indicates resistance to short-term voltage surges in the network. The permissible conductor cross-section is 1 to 25 mm², so the breaker can be integrated into various wiring schemes within the specified connection range. The product complies with EN/IEC 60898, the standard for miniature circuit breakers used in domestic and similar applications. The ETIMAT P10 1p C3 series combines compact modular construction with the electrical ratings needed for local protection of individual circuits in switchboard assemblies.